Fineness test of Cement by dry sieving method 90 micron sieve

Fineness test of cement by dry siveing

CEMENT TEST OF CEMENT BY DRY SIEVING 90 micron is sieve for Fineness test of Cemet by dry sieving method Test standard : IS 4031-Part 1 Test Apparatus : Balance of accuracy 0.01gm with capacity of minimum 10gms.  90micron IS Sieve. Nylon brush. Stopped jar. Tray. Testing Procedure : Agitate the sample of cement to …

Fineness test of Cement by dry sieving method 90 micron sieve Read More »

Aggregate Impact Value Test IS 2386-Part 5: 1963

Aggregate impact value test

DETERMINATION OF IMPACT VALUE OF COARSE AGGREGATE Test Standard : 2386-Part IV: 1963 Test Apparatus: Impact test apparatus with free-falling hammer of 13.5 to 14kg with a height of fall of 380±5mm, with supporting means of hammer whilst fastening or removing the cups. Cylindrical steel cup of internal diameter 102mm and 50mm deep; IS sieves …

Aggregate Impact Value Test IS 2386-Part 5: 1963 Read More »

Aggregate Testing | Ten Percent fine value of Coarse Aggregate IS 2386 -Part 4

TEen percentage fine value test

DETERMINATION OF TEN PERCENT FINES VALUE OF COARSE AGGREGATE Test standard: IS 2386 -Part IV: 1963 Purpose of Test: Ten percent fines value is a measure of the resistance of aggregate crushing subjected to loading and it is applicable to both weak and strong aggregate. Test Apparatus : 15cm diameter open ended cylinder with base …

Aggregate Testing | Ten Percent fine value of Coarse Aggregate IS 2386 -Part 4 Read More »

Determination of Sieve analysis of aggregate IS 2386-Part 1

Sieve analysis test of aggregate

Sieve analysis of aggregate IS 2386-Part 1   Test Standard : IS 2386-Part 1 Test Apparatus :  Balance of accuracy 0.1%   IS sieves 63mm, 40mm, 20mm, 12.5mm, 10mm, 4.75mm, 2.36mm, 1.18mm, 600µ, 300µ, 150µ and 75µ. Test Procedure : Take a representative air-dried sample by quartering method or by a sample driver. Record its weight …

Determination of Sieve analysis of aggregate IS 2386-Part 1 Read More »

Determination of compressive strength of Concrete Cubes

Determination of compressive strength of Concrete Cubes Test standard : IS 516-1959 Test Apparatus :  Compression testing machine capable of loading at 140  Kg/Sqcm/min  Test Procedure : Concrete cubes may be tested at any age but usually, it shall be tested at recognized age of 7&28 days.It is to be tested immediately after removing from …

Determination of compressive strength of Concrete Cubes Read More »