LIST OF IS CODES IN CIVIL ENGINEERING

Important is codes in Civil engineering

List of IS codes (Indian standard codes), which is very important in civil engineering. These IS Code are uses in Highway and Building construction for the standard methods of construction and quality control of construction.

These all IS Codes provides the guidelines for Construction and all standard requirement for construction materials.

IS code No.Description of IS code.
IS: 215-1981Specification for Road Tar (Second Revision)
IS: 73-2006Paving Bitumen- Specification (Third Revision)
IS: 73-1992 Paving Bitumen- Specification (Second Revision)
IS-164-1981Specification for ready mix paint for road marking.
IS: 37-2001Guidelines for the Design of Flexible Pavement.
IS:217-1988Specification for Cutback Bitumen (Second Revision)
IS: 269-1989I.S Ordinary Portland Cement,33 Grade Specification.
IS: 334-2002Glossary of Terms Relating to Bitumen and Tar. (Third Revision)
IS:383-1970 Specification for Coarse and Fine Aggregates From Natural for Concrete (First Revision)
IS: 432-1982 Specification for Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement Part-I Mild Steel and Medium Tensile Steel Bars. (Third Revision)
IS: 454-1994 Cutback Bitumen From Waxy Crude- Specification. (Second Revision)
IS: 455-1989 Portland Slag Cement –Specification (Fourth Revision)
IS: 456-1978Code of Practice for Plain and Reinforced Concrete. (Third Revision)
IS: 458-2003 Precast Concrete Pipes (With and Without Reinforcement)- Specification. (Fourth Revision)
IS: 460-1985 Part-1Specification for Test Sieves Part-1 Wire Cloth Test Sieves. (Third Revision)
IS: 460-1985 Part-2Specification for Test Sieves Part-2 Perforated Plate Test Sieves. (Third Revision)
IS: 460-1985 Part-3 Specification for Test Sieves Part-3 Methods of Examination of Apertures of Test Sieves. (Third Revision)
IS: 516-1959 Eighteenth Reprint June 2006 (Incorporating Amendment No.1 and Including Amendment No.2)
IS: 650- 1991Standard Sand for Cement Testing specification.
IS: 702-1988Specification for Industrial Bitumen (Second Revision) Fifth Reprint June 2007(Including Amendment)
IS: 800-1984Code of practice for general construction in steel.
IS:1077-1992 Common Burnt Clay Building Bricks-Specification. (Fifth Revision)
IS: 1194-1960 Forms for recording measurement of flow of water in open channels.
IS: 1195-2002Bitumen-Mastic for Flooring –Specification. (Third Revision)
IS: 1201-1976 to 1201-1978Methods for Testing Tar and Bituminous. Material (First Revision)
IS: 1202-1978 Method for testing Tar & Bituminous material: Determination of specific
Gravity.
IS: 1203-1978 Methods for Testing Tar and Bituminous Materials Determination of
Penetration (First Revision)
IS: 1205-1978 Method for Testing Tar and Bituminous Materials: Determination Of Softening Point (First Revision)
IS: 1206-1978 Part-1Methods for Testing Tar and Bituminous Material Determination of Viscosity Part-1 Industrial Viscosity (First Revision)
IS: 1207-1978Method for testing Tar & Bituminous material: Determination of equiviscous
Temperature (EVT)
IS: 1208-1978Method for testing Tar & Bituminous material: Determination of Ductility. (First Revision)
IS:1209-1978 Method for testing Tar & Bituminous material: Determination of Flash Point and Fire Point. (First Revision)
IS: 1210-1978Method for testing Tar & Bituminous material: Float Test.
IS: 1211-1978 Method for testing Tar & Bituminous material: Determination of water
Content (Dean Stark Method)
IS: 1212-1978Method for testing Tar & Bituminous material: Determination of Loss on Heating.
IS: 1213-1978Method for testing Tar & Bituminous material: Distillation Test.
IS: 1215-1978 Determination of matter insoluble in toluene.
IS:1216-1978Methods for Testing Tar and Bituminous Materials: Determination of Solubility in Carbon Disulphide or Trichloroethylene (First Revision)
IS: 1217-1978Method for testing tar and bituminous material determination of Mineral matter (ASH)
IS: 1218-1978Method for testing Tar & Bituminous material: Determination of Phends.
IS: 1219-1978Method for testing Tar & Bituminous material: Determination of Naphthalene.
IS: 1220-1978Method for testing Tar & Bituminous material: Determination of Volatile
Matter content
IS: 1343-1980Code of practice for prestressed concrete (First Revision)
IS:1489-1991Portland-Pozzolana Cement-Specification Part-1 Fly Ash Based (Third- Revision) Second Reprint Feb.2005 (Including Amendment Nos.1,2 &3)
IS:1498-1970 Classification and Identification of Soils for General Engineering Purposes (First Revision)
IS: 1566-1982Specification for hard drawn steel wire fabric for concrete reinforcement.
IS: 1702-1967 Specification for spring balance.
IS: 1717-1985Method for simple torsion test for wire.
IS: 1785-1983 Part-1 Specification for Plain Hard –Drawn Steel Wire for Prestressed Concrete, Part 1 Cold Drawn Stress- Relieved Wire (Second Revision).
IS: 1786-1985 Specification for High Strength Deformed Steel Bars and Wires for Concrete Reinforcement (Third Revision)
IS: 1791-1985General requirements for Batch type Conc. Mixes.
IS: 2116-1980Specification for Sand Masonry Mortars (First Revision)
IS: 2131-1981Method for Standard Penetration Test for Soil.
IS 2386 Part-1-1963Method of test for Aggregate for concrete.
IS: 2386 Part-2-1963Methods of Test for Aggregates for Concrete Estimation of Deleterious Materials and Organic Impurities.
IS: 2386 Part-3-1963Specific Gravity, Density, Voids, Absorption and Bulking.
IS: 2386 Part-4-1963Mechanical Properties.
IS: 2386 Part-5-1963Soundness.
IS: 2386 Part-6-1963Measuring Mortar Making Properties of Fine Aggregate.
IS: 2386 Part-7-1963Alkali Aggregate Reactivity.
IS: 2386 Part-8-1963Petrographic Examination.
IS: 2430-1986 Sampling of aggregate for concrete.
IS: 2645-1975 Specification for integral cement water proofing compounds.
IS: 2720 Part-1Method of soil testing
IS: 2720 Part-2Determination of Water Content(Second Revision)
IS: 2720 Part-3Determination of Specific Gravity Section-1 Fine Grained Soils (First Revision)
IS: 2720 Part-5Determination of Liquid and Plastic Limit (Second Revision)
IS: 2720 Part-6Determination of Shrinkage factor.
IS: 2720 Part-7Determination of Water Content –Dry Density Relation Using Light Compaction (second Revision)
IS: 2720 Part-8Determination of Water Content- Dry Density Relation Using Heavy Compaction (First Revision)
IS: 2720 Part-16Laboratory Determination of CBR (Second Revision)
IS: 2720 (Pt-20) 1992Linear Shrinkage.
IS: 2720 (Pt-28)Methods of Test for Soils Part-XXVIII Determination of Dry Density Of Soils, In-Place, By the Sand Replacement Methods (First Revision)
IS: 2720 (Pt-31)CRB
IS: 2720 (Pt-34) 1972 Density of soil in place by rubber Balloon Method.
IS: 2770(Pt- I)-1967Method of testing Bond in reinforced concrete Pt-I pull out Test.
IS: 6003-1983Specification for intented wire for pre-stressed concrete
IS: 3025(Part 2)-1983Method of Sampling & Testing (Physical/Chemical)for water & Waste water Pt II Volve
IS: 3085-1965Method of test for permeability of Cement Mortor and concrete.
IS:3117-2004Bitumen Emulsion for Roads and Allied Applications (Anionic Type) -Specification (First Revision)
IS: 3466-1988 Specification for masonry Cement (Second Revision)
IS: 3495(Pt I to IV) 1976 Method of test of burnt clay building bricks
IS: 3535-1986Methods of Sampling Hydraulic Cement (First Revision)
IS: 3597-1998Concrete Pipes – Methods of test (Second Revision)
IS:3764-1992Excavation Work- Code of Safety (First Revision)
IS: 4031(Pt-2) 1988Physical tests for Hydraulic cement Pt-I Fineness by dry sieving.
IS: 4031 (Pt-2)-1982Physical tests for Hydraulic cement Pt-II Determination of density.
IS: 4031 Part 2-1988Physical tests for Hydraulic cement Part 2 Fineness by specific surface by Blaine air permeability method.
IS: 4031 Part 3-1988Physical tests for Hydraulic cement Part 3 Soundness
IS: 4031 Part 4-1988Physical tests for Hydraulic cement Part 4 Consistency of tandard cement paste.
IS: 4031 Part 5-1988Physical tests for Hydraulic cement Part 5 Initial and final setting times.
IS: 4031 Part 6-1988Physical tests for Hydraulic cement Part 6 Compressive Strength of Hydraulic Cement other than Masonry Cement.
IS: 4031 Part 7-1988Physical tests for Hydraulic cement Part 7 Compressive Strength of Masonry cement.
IS: 4031 Part 8-1988Physical tests for Hydraulic cement Part 8 Transverse and Compressive Strength of plastic mortar using prism.
IS: 4031 Part 9-1988Physical tests for Hydraulic cement Part 9 Heat of Hydration
IS: 4031 Part 10-1988Physical tests for Hydraulic cement Part 10 Drying Shrinkage.
IS: 4031 Part 11-1988Physical tests for Hydraulic cement Part 11 Density.
IS: 4332 (Part IV)-1968 Methods of Test for Stabilized Soils Part IV Wetting and Drying, and Freezing and Thawing Tests for Compacted Soil-Cement Mixtures (Incorporating Amendment No. 1)
IS:4332-1968Methods of Test for Stabilized Soils Part-IV Wetting and Drying And Freezing And Thawing Test for Compacted Soil- Cement Mixtures.
IS: 4634-1991Batch type concrete Mixes –Method of test performance.
IS: 5516-1969Specification for variable flow type Air permeability apparatus Blain type
IS: 5525-1969Recommendation for Detailing of reinforcement in reinforced concrete works.
IS: 5536-1969Specification for constant flow type Air permeability apparatus Blain type
IS: 5640-1970 Method of Test for Determining Aggregate Impact value of Soft Coarse
Aggregate.
IS: 5816-1970Method of Test for Splitting Tensile of Concrete Cylinders.
IS: 6003-1983Specification for Indented Wire for Prestressed Concrete (First Revision)
IS:6006-1983Specification for Uncoated Stress Relieved Strand for Prestressed Concrete
(First Revision)
IS:6241-1971Method of Test for Determination Striping Value of Road Aggregates.
IS: 6403-1981Code of Practice for Determination of Breaking Capacity of Shallow Foundation (First Revision)
IS: 6461 Pt- 2-1972Glossary of the terms relating to Cement Concrete Part I Concrete Aggregate.
IS: 6461 Pt- 2 -1972Glossary of terms relating to Cement Concrete Part II Material other than Cement & Agg.
IS: 6461 Pt- 3-1972 Glossary of terms relating to Cement Concrete Part III Conc. Reinforcement.
IS: 6461 Pt- 4-1972 Glossary of terms relating to Cement Concrete Pt IV Type of Concrete.
IS: 6461 Pt- 5-1972 Glossary of terms relating to Cement Concrete Pt V Form work for Concrete
IS: 6461 Pt-6-1972Glossary of terms relating to Cement Concrete Pt VI Equipment, Tools and Plant.
IS: 6461 Pt.-7-1973 Glossary of terms relating to Cement Concrete Pt VII Mixing, Laying, Compaction, Cursing, Other than constructors Aspect.
IS: 6461 Pt-8-1973Glossary of terms relating to Cement Concrete Pt VIII Properties of Concrete.
IS: 6461 Pt-9-1973Glossary of terms relating to Cement Concrete Pt IX Structural Aspect.
IS: 6461 Pt-10-1973Glossary of terms relating to Cement Concrete Pt X test and testing apparatus.
IS: 6461 Pt-11-1973Glossary of terms relating to Cement Concrete Pt XI Pre-stressed Concrete.
IS: 6461 Pt-12-1973Glossary of terms relating to Cement Concrete Pt XII Miscellaneous.
IS: 6925-1973Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures. (Sixth Reprint August 2006)
IS: 7245-1974Specification for concrete pavers.
IS: 7325-1974Specification for apparatus for determining constituents of fresh concrete
IS: 7325 Part 12-1988Physical tests for Hydraulic cement Part 12 Air content of Hydraulic Cement Mortor.
IS: 7325 Part 13-1988Physical tests for Hydraulic cement Part 13 Water retentivity of Masonry
Cement.
IS: 7325 Part 14-1988Physical tests for Hydraulic cement Part 14 False Set
IS: 8042-1989White Portland cement – Specification.
IS: 8887-2004Bitumen Emulsion for Roads cationic type – Specification (Second Revision)
IS: 9013-1999Concrete Admixture – Specification. (First Revision)
IS: 9013-1978Method of making, curing, determining compressive strength of accelerated cured Concrete.
IS: 9640-1980Specification for Split Spoon Sampler
IS: 10262-1982Recommended Guidelines for Concrete Mix Design.
IS: 10379-1982 Field control of moisture and compaction of soil for Emb/Sg.
IS : 14893-2001Method of Pile Integrity test
IS: 2911Method of static Pile load test
IS: 3812Method of Flyash testing
IS: 5640Method of Wet Impact value test of aggregate
IS: 5892Specification for Transit mixer
IS: 3597Method of Hume Pipe testing
IS: 2062Specification for Roller steel (Dowel bar)

Official Website of BIS : BIS

Read more :

Spread the love

Rajkumar ghagre

Founder & Admin of civilengineeringsolution.com, I am a civil engineer working as a Assistant Engineer (QA/QC).