Material Testing

FLASH POINT AND FIRE POINT OF BITUMEN

stripping value test of aggregate

DETERMINATION OF FLASH POINT AND FIRE POINT OF BITUMEN TEST STANDARD: IS 1448-Part 69: 2013 Determination of flash point and fire point of petroleum product bitumen using Cleveland open cup apparatus, it is applicable to petroleum products having an open cup flash point above 79°C, except fuel oils. APPARATUS: Cleveland open cup apparatus, cleaning solvent, …

FLASH POINT AND FIRE POINT OF BITUMEN Read More »

ASH CONTENT OF LIQUID ADMIXTURE

IS 9103:1999, Reaffirmed 2008

DETERMINATION OF ASH CONTENT OF LIQUID ADMIXTURE TEST STANDARD: IS 9103:1999, Reaffirmed 2008 OBJECTIVE: To determine the ash content which gives an indication of inorganic constituents of liquid admixture APPARATUS: Balance of accuracy0.001gm with capacity, porcelain or silica crucible, oven or Water bath, Muffle furnace, desiccators PROCEDURE: Take accurate weight of silica or porcelain crucible …

ASH CONTENT OF LIQUID ADMIXTURE Read More »

DENSITY AND PH OF LIQUID ADMIXTURE IS 9103

Dry material content of liquid admixture

DETERMINATION OF RELATIVE DENSITY & PH OF LIQUID ADMIXTURE TEST STANDARD: IS 9103:1999, Reaffirmed 2008 APPARATUS: Water bath, Hydrometer, Measuring cylinder PROCEDURE: Place about 400 ml of admixture in a 500-ml graduated cylinder avoiding the formation of air bubbles in the liquid. Maintain the temperature of the liquid and stem to be 20 ± 5ºC …

DENSITY AND PH OF LIQUID ADMIXTURE IS 9103 Read More »

Compressive strength of Microsilica mortar IS 1727

Compressive strength of Microsilica mortar IS 1727

DETERMINATION OF COMPRESSIVE STRENGTH OF MICROSILICA-CEMENTMORTAR TEST METHOD: IS 1727:1967, Reaffirmed 2008 OBJECTIVE: To determine the compressive strength of Microsilica-cement mortar as obtained in standard mortar test cubes prepared and tested under specified conditions. APPARATUS: Balance of accuracy 0.01gm, Standard vibration machine, gauging trowels, Standard sand, Graduated measuring jar, cube mould of size 50x50x50mm, Planetary …

Compressive strength of Microsilica mortar IS 1727 Read More »

Marshall stability and flow Test ASTM D6927

TEST METHOD OF MARSHALL STABILITY AND FLOW OF BITUMINOUS MIXTURE USING MARSHALL APPARATUS TEST STANDARD: AASHTO: T245-94 OBJECTIVE: To determine the measurement of the resistance to plastic flow of cylindrical specimens of bituminous mixture loaded on the lateral surface by means of the marshall apparatus. This method is applicable with mixtures containing asphalt cement, asphalt …

Marshall stability and flow Test ASTM D6927 Read More »