DETERMINATION OF BLEEDING OF FRESH CONCRETE PREPARED WITH ADMIXTURE TEST STANDARD: IS 9103:1999, Reaffirmed 2008 OBJECTIVE: To determine the bleeding of fresh concrete by determining the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete APPARATUS: Concrete batch mixer, weighing balance, cement OPC 43 or 53 grade, Coarse aggregates …
Determine the consistency of concrete by slump test where the nominal maximum size of the aggregates does not exceed 38mm Test Standard : IS 1199:1959 Test Appratus : Slump cone Tamping rod steel of 16mm diameter, 600mm long rounded at one end Fresh concrete Slump cone The concrete mix shall be prepared , the …
Compacting Factor Test of concrete Compaction test Test standard :IS 1199:1959 This test specifies a procedure for determining the workability of concrete, where the nominal maximum size of the aggregate does not exceed 38 mm. The compacting factor test is designed Primarily for use in the laboratory but it can also be used in the …
Compacting Factor Test of concrete IS 1199 : 1959 Read More »
Concrete core Test standard: IS 516:1959 Compressive Strength Definition: Compressive strength is the ability of material or structure to carry the loads on its surface without any crack or deflection. A material under compression tends to reduce the size, while in tension, size elongates. Objective: To determine the compressive strength of concrete cores, …
Compressive strength of Concrete Core specimen IS 516-1959 Read More »
Flexural strength of concrete beam, casted, stored and cured under specified conditions. Test Standard: IS 516:1959 Applications of flexural test: Specifying compliance with standards It is an essential requirement for concrete mix design It is employed in testing concrete for slab and pavement construction Factors affecting of Flexural Test results: Concrete specimen preparation Specimen size …
Flexural Strength test of concrete,its Significance Procedure, applications, IS 516-1959 Read More »